Acura Honda Factory OEM Radio Plug & Play 4 Channel 400 Watt Add an Amp

  • Sale
  • $ 169.99
  • Regular price $ 199.99


Acura Honda Factory OEM Radio Plug & Play 4 Channel 400 Watt


Want to add a boost to your interior speakers?

Want to keep your factory original OEM stereo?

Don’t want or know how cut into your wiring?


Take the guesswork out of the installation with this plug and play wire harness!  Installation is as easy as 1, 2, 3!
  1. Remove your OEM factory radio
  2. Unplug the OEM factory wiring and plug in this wire harness
  3. Reinstall your OEM factory radio

What is it?

This wire harness integrates a 4 channel amp that adds 45 watts RMS to your speakers AND provides a subwoofer signal output with remote turn on so a sub amp can be installed as well.  No additional wires to run or connections to be made to get the 4 channel amp to work!

What you will receive
  • One (1) plug and play wire harness with a pre-installed power pack

Compatibility Notes

  • Where this REALLY shines is when you've replaced your stock speakers with aftermarket 2 or 4 ohm speakers, and are wanting some extra punch.
  • Use caution when installing this on OEM speakers, especially if they are 10+ years old.  Some speakers are only rated in the 10-20 watt range, and while applying 45 watts to them isn't what kills them, its being heavy handed with the volume knob that does. :-) (Think speakers on the rear deck, or in a convertible, that have been exposed to the sun for 10+ years, it won't take much to finish them off!)
  • If this is being installed on a vehicle with a "premium sound" system such as JBL, Pioneer, etc. this harness may need to be connected at the factory OEM amp and not directly at the radio. Again, use caution when doing this because you're really adding a good amount of power to OEM speakers!

    Compatibility 

    MODEL FROM   TO
    TL (with nav) 2009 2014
    TL (without nav) 2009 2014
    TSX (with nav) 2009 2014
    TSX (without nav) 2009 2014
    Accord  (without nav)  (with auto climate) 2013 2017
    Accord  (without nav)  (with manual climate) 2013 2017
    Accord  (with nav)  (gunmetal) 2008 2012
    Accord  (with nav)  (taupe) 2008 2012
    Accord  (without nav)  (with auto climate)  (gunmetal) 2008 2012
    Accord  (without nav)  (with auto climate)  (taupe) 2008 2012
    Accord  (with manual climate)  (gunmetal) 2008 2012
    Accord  (with manual climate)  (taupe) 2008 2012
    Civic  (EX / EX-L / Si) 2014 2015
    Civic  (LX) 2014 2015
    Civic  (with nav) 2013 2013
    Civic  (without nav) 2013 2013
    Civic  (with nav) 2012 2012
    Civic  (without nav) 2012 2012
    Civic  (with nav)  (with gray dash) 2009 2011
    Civic  (with nav)  (with taupe dash) 2009 2011
    CR-V 2016 2016
    CR-V 2015 2015
    CR-V  (with nav) 2012 2014
    CR-V  (without nav) 2012 2014
    CR-V  (w nav) 2010 2011
    CRZ 2011 2016
    Fit 2015 2017
    Fit  (with nav) 2009 2013
    Fit  (without nav) 2009 2013
    HR-V 2016 2017
    Insight  (EX, LX, nav) 2010 2014
    Insight  (base model) 2010 2014
    Odyssey  (EX, EX-L, Touring) 2014 2017
    Odyssey  (LX) 2014 2017
    Odyssey 2011 2013
    Pilot 2016 2016
    Pilot 2012 2015
    Pilot 2009 2011
    Ridgeline  (without touchscreen radio) 2017 2017
    Ridgeline  2009 2014



Amplifier Features and Specifications

Features

 

Amplifier Class

 

FD

 

Low-Pass Crossover Frequency

 

80 Hz

 

Low-Pass Slope (dB/octave)

 

12 dB/octave

 

High-Pass Crossover Frequency

 

80 Hz

 

High-Pass Slope (dB/octave)

 

12 dB/octave

 

Fuse Rating

 

15

 

Width (inches)

 

8-1/8"

 

Height (inches)

 

1-9/16"

 

Depth (inches)

 

2-9/16"

 

Performance

 

RMS Power Output (Watts x Channels)

 

45 x 4

 

Peak Power Output (Watts x Channels)

 

100 x 4

 

Power at 2 Ohms (Watts x Channels)

 

45 x 4

 

Minimum Impedance Unbridged

 

2

 

Best Frequency Response

 

10-40k Hz

 

THD at Rated RMS Power

 

1%

 

Signal to Noise Ratio

 

74 dB

 

Input Voltage

 

14.4v